SUCCESSFUL ENGINEERING
INNOVATIVE TECHNICAL SOLUTION
RELIABLE SOLUTION
+7 (495) 780-57-86
Заказать звонок
About Us
Technologies and equipment
Implemented projects
Industry solutions
Contact Us
About Us
Technologies and equipment
Implemented projects
Industry solutions
Contact Us
Implemented projects
Implemented projects
Implemented projects
Filter:
Сортировка
Show
Customer
Gazpromneft-Catalyst Systems LLC
JSC Angarsk Petrochemical Company (Rosneft)
JSC East Siberian Oil and Gas Company (Rosneft)
JSC Gazprom Neft, Moscow Refinery
JSC Gazprom Neft-Omsk Refinery
JSC Novokuibyshevsk Refinery (Rosneft)
JSC Voronezhsintezkauchuk (Sibur)
LLC Lukoil Nizhnevolzhskneft
LLC RN-Komsomolskiy Refinery
OAO Angarsk Petrochemical Company, Angarsk
OAO Gazprom neftekhim Salavat
RN-Krasnodarneftegaz
TOMET LLC (methanol production)
Show all
Show
Industry
Gas and oil
Oil production and development
Oil refining
Petrochemicals
Show
Scope
Development of technical documentation, production and supply of equipment
Development of technical project and technical documentation, selection of necessary equipment, supply, installation supervision, commissioning, personnel training.
Development of technical project and technical documentation, selection of required equipment, supply, installation supervision, commissioning, training, comprehensive maintenance
Project design, development of technical documentation, equipment supply, installation supervision, commissioning, technical support
Selection of necessary equipment, supply, installation supervision, commissioning
Supply of equipment, installation supervision, commissioning
Show all
Show
Service
Blowdown and pressure testing of tanks, pipelines
Combustion of hydrocarbon gas
Crane Pacific Valves, DN300 mm PN250 kgf/cm2 for welding. Spare parts for the main equipment
For use in a rubber production plant
Heat recovery from reformed gas in a steam reformer
Oil/ fuel oil heat exchanger, crude oil heating (2 pcs.)
Pumped medium - associated petroleum gas
Pumped medium - hydrogen
Purification of the service liquid from dissolved oxygen
Rubber production
Slurry decantation
Smoke-free combustion of emissions
Spare parts for main equipment
Used in a furnace using synthesis gas to produce methanol
Show all
Show
Technical specifications of the equipment
Capacity 214.87 m3/h Volume 75 m3 Size: 15.2 x 4.1 x 4.1 m (L x W x H)
Capacity: shell side - 6,48 m3, tube side - 3,47 m3, Design pressure: shell side - 11,6 MPa, tube side - 3,55 MPa, Design temperature: shell side - 320/350/400/550 °C, tube side - 385/350/400/550 °C
CPCW-3 model burners for visbreaking furnaces (concave refractory stone burners, including electric pilot with flame sensor and InSight 95DS-ICG Model S2 main flame scanner, igniter, portable with piezoelectric starter STD-1
DN300 mm PN250 kgf/cm2 for welding
Each unit capacity 34392 m3/h, suction pressure - 0.5 MPa (g), discharge pressure 4.4 MPa (g), capacity of one CU - 2.8 MW Compressor General Electric Oil&Gas (Cooper Machinery) WG74 + Engine General Electric Waukesha (Innio Waukesha) 12V275GL Compressor
Each unit has a capacity of 52,600 nm3/h, 4.2 MPa inlet pressure, 5.3 MPa discharge pressure, unit capacity 1.0 MW
High dewatering separation centrifuge. Capacity: up to 15 m3/h Number of revolutions: 3800 rpm Dimensions: 2.9 x 1.5 x 1.1 m
K-1: Flow rate 3,500 kg/h Discharge pressure 100 kgf/cm2 K-2: Flow rate 2,400 kg/h Discharge pressure 350 kgf/cm2
Line with 30,000 tpy of СКД-НД rubber, cold flow rate 10-25 mm/hour
Maximum gas consumption for combustion - 140,000 kg/h
Multibeam flare tip model Hemis high pressure (13-A-401) and flare tip model Hemis HF-12 low pressure (13-A-4102)
Product flow rate: 222,109 / 502,827 kg/h; 223,853 / 318,792 kg/h Operating pressure: 2.98 / 3.72 MPa; 2.48/1.99 MPa Operating temperature: 370/250 C; 225 / 155 C
Product flow: 1000 kg/h to 152,500 kg/h, Operating pressure: 0.34 MPa to 3.7 MPa, Operating temperature: 120 °C to 400 °C
Rated crumb rubber СД 4500 kg/hour, hydraulic drive, pressure 47 kgf/cm2, Siemens PLC
Soft insert in front of ceiling burner models EJ-1, EJ-2, EJ-3, EJ4, EJ-5, EJ-10
Total flare system flow rate 360 t/h. Flare system for combustion of hydrocarbon gases 50m high. Diameter 2,4m; flow rate 173 t/h + 1 combustion chamber (flare) for acid gas combustion h=50m, flow rate 13 t/h
Triple JGC/6-4 piston compressor packages powered by CAT G3616 gas piston engines for associated petroleum gas transfer and gas lift gas return, each with a capacity of 19,012nm3/h and an operating pressure of 67 bar(g)
Show all
Show
Project baseline
2007 - 1 piece, 2018 - 1 piece.
2010
2011
2012
2013
2014
2014 - 2016
2015
2016
2017-2021
2019-2020
2021-2022
Show all
Show
Region
Angarsk
Astrakhan
Khabarovsk region, Komsomolsk-on-Amur
Krasnodar
Krasnoyarsk region, Evenki District.
Moscow
Novokuibyshevsk, Samara region
Omsk, the Russian Federation
Salavat, Republic of Bashkortostan, the Russian Federation
Togliatti
Voronezh
Show all
Show
Selected:
0
Show
Reset
Selected:
0
Show
По наименованию (А-Я)
По наименованию (Я-А)
По популярности (возрастание)
По популярности (убывание)
Supply and commissioning of the feed gas compressor station of the facility "fuel gas treatment unit UPTG-1" of the Yurubcheno-Tokhomskoye field.
Supply and commissioning of compressor units with Ariel JGT/2 compressors as part of the start-up of the catalytic reforming complex with continuous catalyst regeneration (CCR) and low-temperature isomerization complex.
Supply and installation supervision of a Callidus (USA) enclosed flare system as part of a comprehensive refinery modification and construction project of hydrocracking complex.
Callidus burners for visbreaking furnaces
Anderson (USA) rubber production line
Callidus flare system for the Filanovsky offshore platform
Callidus burners for reformers
Compressor packages
Enclosed Ground Flare System
Ariel compressor unit
Deaerator
Soft inserts (linear expansion joints)
Shut-off and control valves
Electrically driven three-phase centrifuge
Briquette press
Vibration feeders + air conditioners
Supply of 44 welded plate heat exchangers for the "Catalytic Cracking Complex with a capacity of 1095 thousand tonnes/year Refinery. Catalytic cracking unit.
Supply of 2nd stage waste-heat boiler item 112 for steam reformer
Supply of welded plate heat exchangers for the AT-9 plant reconstruction project
Supply of raw material pumps for the project of hydro-treatment and diesel oil dewaxing plant
Supply of spray drying units for the "Construction of a catalyst plant" project
Найти