Implemented projects

Сортировка

Show

Customer

Gazpromneft-Catalyst Systems LLC

JSC Angarsk Petrochemical Company (Rosneft)

JSC East Siberian Oil and Gas Company (Rosneft)

JSC Gazprom Neft, Moscow Refinery

JSC Gazprom Neft-Omsk Refinery

JSC Novokuibyshevsk Refinery (Rosneft)

JSC Voronezhsintezkauchuk (Sibur)

LLC Lukoil Nizhnevolzhskneft

LLC RN-Komsomolskiy Refinery

OAO Angarsk Petrochemical Company, Angarsk

OAO Gazprom neftekhim Salavat

RN-Krasnodarneftegaz

TOMET LLC (methanol production)

Show all

Show

Industry

Gas and oil

Oil production and development

Oil refining

Petrochemicals

Show

Scope

Development of technical documentation, production and supply of equipment

Development of technical project and technical documentation, selection of necessary equipment, supply, installation supervision, commissioning, personnel training.

Development of technical project and technical documentation, selection of required equipment, supply, installation supervision, commissioning, training, comprehensive maintenance

Project design, development of technical documentation, equipment supply, installation supervision, commissioning, technical support

Selection of necessary equipment, supply, installation supervision, commissioning

Supply of equipment, installation supervision, commissioning

Show all

Show

Service

Blowdown and pressure testing of tanks, pipelines

Combustion of hydrocarbon gas

Crane Pacific Valves, DN300 mm PN250 kgf/cm2 for welding. Spare parts for the main equipment

For use in a rubber production plant

Heat recovery from reformed gas in a steam reformer

Oil/ fuel oil heat exchanger, crude oil heating (2 pcs.)

Pumped medium - associated petroleum gas

Pumped medium - hydrogen

Purification of the service liquid from dissolved oxygen

Rubber production

Slurry decantation

Smoke-free combustion of emissions

Spare parts for main equipment

Used in a furnace using synthesis gas to produce methanol

Show all

Show

Technical specifications of the equipment

Capacity 214.87 m3/h Volume 75 m3 Size: 15.2 x 4.1 x 4.1 m (L x W x H)

Capacity: shell side - 6,48 m3, tube side - 3,47 m3, Design pressure: shell side - 11,6 MPa, tube side - 3,55 MPa, Design temperature: shell side - 320/350/400/550 °C, tube side - 385/350/400/550 °C

CPCW-3 model burners for visbreaking furnaces (concave refractory stone burners, including electric pilot with flame sensor and InSight 95DS-ICG Model S2 main flame scanner, igniter, portable with piezoelectric starter STD-1

DN300 mm PN250 kgf/cm2 for welding

Each unit capacity 34392 m3/h, suction pressure - 0.5 MPa (g), discharge pressure 4.4 MPa (g), capacity of one CU - 2.8 MW Compressor General Electric Oil&Gas (Cooper Machinery) WG74 + Engine General Electric Waukesha (Innio Waukesha) 12V275GL Compressor

Each unit has a capacity of 52,600 nm3/h, 4.2 MPa inlet pressure, 5.3 MPa discharge pressure, unit capacity 1.0 MW

High dewatering separation centrifuge. Capacity: up to 15 m3/h Number of revolutions: 3800 rpm Dimensions: 2.9 x 1.5 x 1.1 m

K-1: Flow rate 3,500 kg/h Discharge pressure 100 kgf/cm2 K-2: Flow rate 2,400 kg/h Discharge pressure 350 kgf/cm2

Line with 30,000 tpy of СКД-НД rubber, cold flow rate 10-25 mm/hour

Maximum gas consumption for combustion - 140,000 kg/h

Multibeam flare tip model Hemis high pressure (13-A-401) and flare tip model Hemis HF-12 low pressure (13-A-4102)

Product flow rate: 222,109 / 502,827 kg/h; 223,853 / 318,792 kg/h Operating pressure: 2.98 / 3.72 MPa; 2.48/1.99 MPa Operating temperature: 370/250 C; 225 / 155 C

Product flow: 1000 kg/h to 152,500 kg/h, Operating pressure: 0.34 MPa to 3.7 MPa, Operating temperature: 120 °C to 400 °C

Rated crumb rubber СД 4500 kg/hour, hydraulic drive, pressure 47 kgf/cm2, Siemens PLC

Soft insert in front of ceiling burner models EJ-1, EJ-2, EJ-3, EJ4, EJ-5, EJ-10

Total flare system flow rate 360 t/h. Flare system for combustion of hydrocarbon gases 50m high. Diameter 2,4m; flow rate 173 t/h + 1 combustion chamber (flare) for acid gas combustion h=50m, flow rate 13 t/h

Triple JGC/6-4 piston compressor packages powered by CAT G3616 gas piston engines for associated petroleum gas transfer and gas lift gas return, each with a capacity of 19,012nm3/h and an operating pressure of 67 bar(g)

Show all

Show

Project baseline

2007 - 1 piece, 2018 - 1 piece.

2010

2011

2012

2013

2014

2014 - 2016

2015

2016