COMPRESSORS
Compressor Technology offers both series solutions for general industrial applications and individually designed systems for the gas, petrochemical, cooling and power generation industries.
For the gas and petrochemical industry, the company offers systems based on piston, screw and centrifugal compressors.
High speed reciprocating compressor:
-
used for high pressures up to 54.0 MPa
-
enable compression of any gases, including those with a sufficiently high content of corrosive components due to continuous improvement of the materials used in their design
-
used for field installations
-
with electric motors or gas engines, rated from 300 kW to 3 MW
-
the use of gas engines makes it possible to reduce consumption of electricity, which is usually in short supply at remote sites, and at the same time to use associated petroleum gas as fuel gas, thus reducing harmful emissions into the atmosphere
Low-speed reciprocating compressor:
-
are used in oil and gas plants
-
comply with API 618 requirements
-
low speeds, extended lanterns, cooled cylinders, no oil in the compression chamber, etc.
-
allow the safest possible compression of difficult gases (hydrogen gas, ethylene, etc.)
Screw compressors:
-
mainly used for pumping large volumes of gas
-
lubricated or unlubricated versions are available
-
unlubricated (dry) are used when it is necessary to compress gas with a high content of heavy hydrocarbons
-
low mass and dimensions parameters in comparison to reciprocating compressors, no vertical dynamic loads, which allows optimization of construction costs by reducing the thickness of the foundation pillow
-
noisier, more wear-resistant due to the absence of friction pairs
-
compressors can be serviced quickly and do not require highly qualified personnel
-
before selecting the type of screw compressor, the company calculates the probability of condensation during the compression process.
Centrifugal compressor:
-
are used to pump the largest possible volumes of gas
-
allow a gas turbine to be installed as a drive and therefore increase the unit capacity of a single unit up to 24 MW
-
allow associated gas to be utilized as fuel gas, reducing electricity consumption and harmful emissions
-
maintenance-free due to the absence of friction pairs
Air compressors:
-
in general industrial version
-
depending on requirements, oil lubricated and oil-free (dry)
-
power up to 500 kW
-
compressors can be supplied with dryers, cooling water recirculation, cooling towers, filters and other auxiliary equipment
-
compressors can be placed either in a permanent or quickly erected building or in a modular system
-
used for the production of instrumentation air, for pneumatic conveying, for various technological processes
-
standard range of equipment, which allows for significantly shorter delivery times by eliminating the design and certification process in the project, and by optimizing production processes
Company products:
-
gas injection compressors
-
booster compressors
-
compressors for fuel gas treatment plants
-
compressors for gas injection
-
compressors for petrochemical industry according to API 618
-
compressors for natural gas
-
APG сompressors
-
air compressors
-
refrigeration compressors (ammonia, propane)
Services provided by the company:
-
Production process calculation (compression, condensate precipitation, gas treatment to various requirements)
-
Individual project planning
-
Durability calculations, pulsation analysis, torsional vibration analysis
-
Issuance of documentation according to Russian ND requirements
-
Certification of equipment according to Russian norms
-
Installation supervision, commissioning and training
-
PSA
The company offers gas purification and separation plants based on pressure swing adsorption technology. A classic PSA plant consists of a pair of vessels (adsorbers) filled with a bulk substance - an adsorbent. The feed gas under pressure flows through the adsorber, which absorbs the non-target components, as a result the purified product gas leaves the adsorber. When paired, the adsorbers work alternately: while one adsorber absorbs impurities from the feed gas, the second adsorber is in regeneration mode. Regeneration of the desiccant is achieved either by reducing the pressure or by increasing the temperature. Typically, pressure reduction regeneration is used in PSA. Depending on the type of medium to be cleaned, the adsorbent and the operating mode of the unit will be selected.
Company products:
-
PSA for the production of hydrogen (purity up to 99.998%)
-
PSA for recovery of methane from natural gas
-
PSA for the production of nitrogen and oxygen